website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 1 gs1a thru gs1m surface mount general rectifier reverse voltage - 50 to 1000 volts forward current - 1.0 ampere features the plastic package carries underwriters laboratory flammability classification 94v-0 for surface mounted applications low reverse leakage built-in strain relief, ideal for automated placement high forward surge current capability high temperature soldering guaranteed: 250 /10 seconds at terminals mechanical data case : jedec do-214ac molded plastic body terminals : solder plated, solderable per mil-std-750, method 2026 polarity : color band denotes cathode end mounting position : any weight : 0.075 grams maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inducti ve load. for capacitive load, derate current by 20% ? symbols gs1a gs1b gs1d GS1G gs1j gs1k gs1m units maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 volts maximum rms voltage v rms 35 70 140 280 420 560 700 volts maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 volts maximum average forward rectified current at t l =55 i (av) 1.0 amp peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 30 amps maximum instantaneous forward voltage at 1.0a v f 1.1 volts maximum dc reverse current t a =25 at rated dc blocking voltage t a =100 i r 5.0 50.0 a typical junction capacitance (note 1) c j 15.0 pf typical thermal resistance (note 2) r qja 75.0 /w operating junction and storage temperature range t j ,t stg -65 to +175 note: 1.measured at 1mhz and applied reverse voltage of 4.0v d.c. 2.p.c.b. mounted with 0.2x0.2 ? (5.0x5.0mm) copper pad areas
website: www.kingtronics.com email: info@kingtronics.com tel: (852) 8106 7033 fax: (852) 8106 7099 2 gs1a thru gs1m ratings and characteristic curves gs1a thru gs1m note: specifications are subject to change without notice.
|
